![]() The last line before the login it will be displayed a IP. Now plug it in your Raspberry Pi and connect HDMI output device (aka TV, Projector, etc) and to power. The content of the "wpa_nf" is as follows country=GBĬtrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev a new file without extension called ssh. ![]() You need to make 2 files in the boot partition. When done unplug it, it is already ejected by Etcher, and put it back in, there will be a boot partition of ~50Mb and you will be prompted to format a "unformatted partition" DON'T FORMAT IT, windows can't read linux partitions and there is a ext4 partion. In Etcher click select image and choose the downloaded zip file (for me at the time i write this is " -raspbian-stretch-lite.zip", then select the card reader from the list displayed and at least click flash, it will ask for permission the User Account Control (UAC), allow it, it needs to physically access the sdcard in exclusive mode to write the image. Now that you have all this we are gonna start Etcher and insert the card in the card reader and the reader in the computer :P
0 Comments
Leave a Reply. |